Battery Equivalents and Replacements

How to Change Audi Key Fob Battery

Audi vehicles are renowned for their luxury, performance, and advanced technology, including their key fobs, which provide convenience and security. However, like all battery-operated devices, the key fob battery will eventually need replacement.

Recognizing the signs of a weakening battery, knowing which battery to use, and understanding how to change it are essential for maintaining your Audi's accessibility and functionality.

Published: April 3, 2024.

audi 1

First Signs of Weak Audi Key Fob Battery

Several indicators can signal that the battery in your Audi key fob is nearing the end of its life:

  • Decreased Range: If you have to press the key fob multiple times or get closer to your vehicle than usual to lock or unlock the doors, this may indicate a weak battery.
  • Inconsistent Response: When the key fob intermittently fails to unlock the doors, trunk, or does not start the car's ignition system reliably, it's likely due to a battery issue.
  • Warning Indicator: Some Audi models include a dashboard warning light or message that alerts you when your key fob battery is low.

Addressing these signs promptly can prevent situations where the key fob becomes entirely unresponsive.

Most Common Audi Key Fob Batteries

Audi key fobs generally use CR2032 or CR2025 3-volt lithium coin batteries. These batteries are widely available at electronics stores, automotive parts retailers, and online.

The specific type of battery required can depend on the model and year of your Audi. It's always best to check your Audi's owner's manual or remove the existing battery to verify the correct type before purchasing a replacement.

Popular Audi Models and Their Key Fob Batteries

Audi's lineup of vehicles is diverse, ranging from luxurious sedans and sporty coupes to versatile SUVs. Each model comes with a key fob designed to enhance the driving experience through convenience and advanced features.

Over time, the battery in the key fob will need to be replaced to ensure it continues to function correctly. Knowing the type of battery your Audi key fob requires can save time and help maintain seamless operation.

Popular Audi Sedans and Coupes

  • Audi A3/S3/RS3: These models typically use a CR2032 battery, known for its reliability and easy availability.
  • Audi A4/S4/RS4: The key fobs for these models usually require a CR2032 battery, offering long-lasting performance.
  • Audi A5/S5/RS5: Like its sedan counterparts, the A5 series typically uses a CR2032 battery in its key fob.
  • Audi A6/S6/RS6: The sophisticated A6 lineup often relies on a CR2032 battery for its key fob functionality.
  • Audi A7/S7/RS7: These stylish and powerful models also use a CR2032 battery in their key fobs.
  • Audi A8/S8: The flagship sedan from Audi usually requires a CR2032 battery for its advanced key fob.

Popular Audi SUVs

  • Audi Q3: The compact SUV from Audi typically uses a CR2032 battery in its key fob for convenience and reliability.
  • Audi Q5/SQ5: For the mid-size SUV option, the key fob generally requires a CR2032 battery.
  • Audi Q7: The larger SUV from Audi, designed for luxury and space, uses a CR2032 battery in its key fob.
  • Audi Q8/SQ8: The top-tier SUV with cutting-edge features also relies on a CR2032 battery for its key fob.

Special Models

  • Audi TT/TTS/TT RS: The sporty and compact TT series uses a CR2032 battery in its key fob, matching its sleek design with convenience.
  • Audi R8: The high-performance sports car, an icon of Audi's engineering, typically uses a CR2032 battery for its key fob, ensuring the ease of access and security.

The CR2032 3-volt lithium coin battery is the most common type used across a wide range of Audi key fobs, appreciated for its longevity and widespread availability.

However, it's always recommended to check the specific requirements for your model either by consulting the owner's manual or by inspecting the existing battery in your key fob.

How to Change Your Audi Key Fob Battery

Changing the battery in an Audi key fob is a straightforward process that you can do yourself with minimal tools. Here's how:

  • Find the Notch: Look for a small notch or indentation along the seam of the key fob. This is usually located on the side or bottom.
  • Open the Key Fob: Insert a small flat-head screwdriver into the notch and gently pry the two halves of the key fob apart. Some models might have a slide or button that releases the back cover instead.
  • Identify and Remove the Old Battery: Once opened, locate the battery. Note its orientation before carefully removing it. A small flat-head screwdriver or a plastic pry tool can be helpful for lifting the battery out.
  • Insert the New Battery: Place the new battery into the key fob, ensuring it's facing the correct direction. Press down to ensure it's securely in place.
  • Reassemble the Key Fob: Align the two halves of the key fob and press them together until they snap closed securely.
  • Test the Key Fob: After changing the battery, test the key fob by locking and unlocking your Audi to ensure it's working correctly.

Additional Tips

  • Handle with Care: Be gentle when prying apart the key fob to avoid damaging the plastic casing or the internal components.
  • Avoid Touching the Battery Contacts: Try not to touch the new battery's contacts with your fingers, as oils and dirt can affect performance.
  • Recycle the Old Battery: Lithium batteries should be recycled properly. Many electronics stores offer battery recycling services.

Audi Key Fob Not Working After Battery Replacement

Changing the battery in your Audi key fob should ideally restore its functionality to full capacity. However, there are instances where the key fob may not work even after a battery replacement.

This situation can be frustrating, especially when you've followed the replacement process correctly. Understanding why this happens and knowing how to troubleshoot can quickly get your key fob back in working order.

Potential Reasons for Malfunction

Several reasons could explain why your Audi key fob isn't working after a battery change:

  • Improper Battery Installation: The most common issue is that the new battery might not be installed correctly. This can include the battery being inserted upside down, not being seated properly, or using the wrong battery type.
  • Damaged Key Fob: The key fob itself might have been damaged, either internally or externally. This damage could occur if the key fob was dropped, exposed to liquids, or if force was used improperly during the battery change.
  • Electronic Reset Needed: Sometimes, after changing the battery, the key fob needs to be reset or re-synchronized with the vehicle. This is because the key fob's internal electronics might have lost their connection to the car's security system during the battery replacement.

Troubleshooting Steps

If your Audi key fob isn't working after changing the battery, here are some steps you can take to troubleshoot:

  • Double-Check the Battery: Ensure the new battery is the correct type and that it's installed correctly, with the positive side facing the right direction. Also, verify that the battery is fresh and has a full charge.
  • Clean the Battery Contacts: Sometimes, the contacts within the key fob can become dirty or corroded. Carefully clean the contacts with a small amount of rubbing alcohol on a cotton swab to ensure a good connection.
  • Reset or Re-synchronize the Key Fob: Consult your Audi's owner's manual for instructions on resetting or re-synchronizing your key fob. This process can vary by model but often involves steps like pressing specific buttons on the key fob while the vehicle is in a particular mode.
  • Check for Physical Damage: Inspect the key fob for any signs of physical damage or loose components that may have occurred during the battery replacement process. If damage is found, the key fob may need to be repaired or replaced.

When to Seek Professional Help

If, after attempting these troubleshooting steps, your Audi key fob still doesn't work, it may be time to seek professional help. An Audi dealership or a qualified automotive locksmith can diagnose the issue more thoroughly.

They have the tools and expertise to repair or replace the key fob and can reprogram it to ensure it communicates correctly with your vehicle's security system.

audi 2

How to Start Audi With Dead Key Fob Battery

Starting an Audi with a dead key fob battery can initially seem like a challenge, especially considering the advanced electronic systems in modern vehicles.

However, Audi designs its vehicles with alternative methods to start the car even when the key fob battery is dead, ensuring you're not stranded. Here's how to get your Audi running when faced with this situation:

For Audi Models with a Start/Stop Button

  • Locate the Key Fob's Emergency Key: Most Audi key fobs have a built-in emergency key that you can access by pressing a small release button on the fob. This key can be used to unlock the doors manually.
  • Enter Your Vehicle: Once inside, the next steps will depend on your specific Audi model. Some models have a designated area (often in the center console or near the steering column) where you can insert the key fob itself or the emergency key. This area acts as a backup reader for the key fob, allowing the car to detect it even without a battery.
  • Press the Key Fob Against the Start/Stop Button: If your model doesn't have a slot for the key fob, press the key fob directly against the Start/Stop button. The button often has a built-in reader that can detect the key fob's RFID chip. Ensure you're pressing the brake pedal (or clutch, in manual transmissions) while you do this.
  • Start the Engine: With the key fob pressed against the Start/Stop button and the brake or clutch engaged, press the button to start your vehicle. The car should recognize the key fob's chip and allow you to start the engine.

For Audi Models Without a Start/Stop Button

If your Audi is an older model without a push-to-start button, you will likely use the emergency key to start your car:

  • Access the Ignition Slot: Use the emergency key to uncover the ignition slot if it's hidden or capped in more modern designs that typically don't use a physical key for starting.
  • Insert the Emergency Key and Start: Insert the emergency key into the ignition slot and turn it to start the engine, as you would with a traditional key.

Tips for Dealing with a Dead Key Fob Battery

  • Keep a Spare Battery: To avoid being caught off guard, it's a good practice to keep a spare key fob battery in your glove compartment or wallet.
  • Replace Batteries Periodically: Key fob batteries usually last several years, but it's wise to replace them periodically to avoid unexpected failures.
  • Consult Your Audi Manual: Specific steps can vary depending on the model and year of your Audi. Always consult your vehicle's manual for the most accurate information.

Knowing how to start your Audi with a dead key fob battery ensures that you're prepared for this common inconvenience.

While the situation might seem daunting at first, Audi's design allows for a straightforward solution to get you back on the road. Thus, whatever happens, stay calm and stay safe.