Battery Equivalents and Replacements

How to Change Chrysler Key Fob Battery

Changing the battery in your Chrysler key fob is a simple yet essential task that ensures the continued convenience and security of your vehicle. As a crucial component of modern automotive technology, the key fob allows you to lock, unlock, and start your car remotely.

Over time, the battery in your key fob will lose its charge, leading to reduced functionality.

Published: May 14, 2024.

chrysler key fob battery 1

First Signs of Weak Chrysler Key Fob Battery

A weak Chrysler key fob battery can manifest through several noticeable symptoms, signaling that it’s time for a replacement. One of the earliest indicators is a reduction in the operational range of the key fob.

You may find yourself needing to be closer to your vehicle for the key fob to function correctly. This can be inconvenient, especially if you are accustomed to unlocking or starting your car from a distance.

Another common sign is a delayed response from the vehicle when you press the key fob buttons. Normally, pressing a button on the key fob results in an immediate action, such as unlocking the doors or opening the trunk.

If you observe a lag between pressing the button and the vehicle responding, it is a clear indication that the battery is losing its charge. Additionally, you might have to press the buttons multiple times to get a response, signaling that the battery is nearing the end of its life.

The key fob’s indicator light can also serve as a warning signal. Many key fobs have a small LED light that illuminates when a button is pressed. If this light appears dimmer than usual or fails to light up, it strongly indicates that the battery needs replacing. Ignoring these early signs can lead to complete key fob failure, leaving you unable to access or start your vehicle.

Lastly, some modern Chrysler vehicles are equipped with dashboard notifications that alert you to the key fob battery status. If your vehicle has this feature, a warning message may appear on the dashboard, indicating a low battery. Paying attention to these notifications can prevent the inconvenience of a non-functioning key fob when you need it most.

Most Common Key Fob Batteries

Key fobs typically use small, coin-shaped lithium batteries known for their longevity and reliability. The most common batteries for Chrysler key fobs are CR2032 and CR2025. These batteries are widely available and can be found in most electronic stores, supermarkets, and online retailers. Understanding the specific battery type your key fob requires is crucial for ensuring optimal performance.

The CR2032 battery is the more prevalent type used in Chrysler key fobs. It is a 3-volt lithium battery with a diameter of 20mm and a thickness of 3.2mm. This battery is favored for its capacity and long shelf life, often lasting several years under normal usage conditions. Its higher capacity compared to other battery types makes it suitable for devices that require consistent power output.

Alternatively, some Chrysler key fobs use the CR2025 battery. This battery also operates at 3 volts but is slightly thinner, measuring 2.5mm in thickness. Although it has a lower capacity than the CR2032, it is still effective for use in key fobs and other small electronic devices. The choice between CR2032 and CR2025 often depends on the design and space constraints of the key fob.

When purchasing a replacement battery, it is essential to choose a reputable brand to ensure longevity and reliability. Brands such as Duracell, Energizer, and Panasonic are well-regarded in the market for their quality and durability. Using a high-quality battery can extend the life of your key fob and provide consistent performance.

How to Change Your Chrysler Key Fob Battery

Changing the battery in your Chrysler key fob is a straightforward process that can be done at home with minimal tools. To begin, gather the necessary materials: a small flat-head screwdriver and the replacement battery (CR2032 or CR2025, depending on your key fob model). Make sure you have a clean, well-lit workspace to prevent losing any small components.

Start by locating the seam or notch on the key fob casing. This is usually where the two halves of the fob meet. Insert the flat-head screwdriver into the seam and gently twist to pry the two halves apart. Be cautious not to use excessive force, as this can damage the plastic casing. Once the fob is open, you will see the circuit board and the battery.

Carefully remove the old battery, taking note of its orientation. The positive side (usually marked with a plus sign) should be facing up. Insert the new battery in the same orientation, ensuring it is seated firmly in the battery compartment. If the battery is not properly seated, the key fob may not function correctly.

After replacing the battery, snap the two halves of the key fob casing back together. Ensure all edges are aligned and press firmly until the fob clicks into place. Test the key fob by pressing the buttons to confirm that the new battery is working. If the key fob does not respond, double-check the battery orientation and ensure the contacts are clean and free of corrosion.

Do You Have To Reprogram the Chrysler Key Fob After the Battery Replacement?

In most cases, you do not need to reprogram your Chrysler key fob after replacing the battery. The key fob retains its programming and should function normally once the new battery is installed. However, if you experience any issues with the key fob not working correctly after the battery change, there are a few troubleshooting steps you can take.

First, ensure that the battery is installed correctly and that the contacts are clean. Sometimes, a simple reassembly can resolve any connectivity issues. If the key fob still does not work, try pressing the buttons multiple times to reset the connection with the vehicle. This can sometimes help re-establish communication between the key fob and the car's receiver.

If these steps do not resolve the issue, consult your vehicle’s owner manual for specific instructions related to key fob reprogramming. Some models may have a reprogramming procedure that involves turning the ignition key to specific positions or pressing a combination of buttons on the key fob. Follow the instructions carefully to ensure successful reprogramming.

In rare cases, if the key fob continues to malfunction, it may be necessary to visit a Chrysler dealership or a professional automotive locksmith. They have the specialized equipment and expertise to diagnose and fix key fob issues, including reprogramming or replacing faulty components.

Chrysler Key Fob Not Working After Battery Change

If your Chrysler key fob is not working after a battery change, there could be several reasons behind the malfunction. One common issue is improper battery installation. Ensure that the battery is inserted with the correct orientation, and the positive side is facing the right direction. Additionally, make sure the battery is seated firmly in its compartment, and the contacts are clean and free of corrosion.

Another potential issue is a faulty battery. Even new batteries can sometimes be defective. Try replacing the battery again with another new one to rule out this possibility. It’s also essential to use the correct type of battery (CR2032 or CR2025) as specified in your vehicle’s owner's manual.

If the key fob still does not work, it may need to be re-synchronized with your vehicle. Some Chrysler models require a specific sequence to re-establish the connection between the key fob and the car. Refer to your owner manual for re-synchronization instructions. This process usually involves pressing certain buttons on the key fob while performing actions inside the vehicle, such as turning the ignition key to specific positions.

In some cases, the issue might be more complex, involving internal damage to the key fob’s circuitry. Dropping the key fob or exposure to moisture can damage its internal components, leading to malfunction. If you suspect internal damage, it’s best to seek professional help from a Chrysler dealership or an automotive locksmith who can diagnose and repair or replace the key fob.

Understanding these troubleshooting steps can help you quickly address any issues with your Chrysler key fob after a battery change, ensuring your vehicle remains accessible and operational. Regular maintenance and careful handling of the key fob can prevent many of these problems, ensuring its reliable performance over time.

Popular Chrysler Models and Their Key Fob Batteries

Chrysler, a storied name in the automotive industry, offers a range of vehicles known for their innovation, comfort, and performance. Each Chrysler model is equipped with advanced key fob systems designed to provide convenience and security. Understanding the key fob batteries for popular Chrysler models can help owners maintain their vehicles' seamless operation.

One of Chrysler's flagship models, the Chrysler 300, is a full-size luxury sedan known for its powerful performance and elegant design. The key fob for the Chrysler 300 typically uses a CR2032 battery. This battery supports various key fob functions, such as keyless entry, remote start, and trunk release. The high capacity of the CR2032 ensures that the key fob can reliably perform these functions over an extended period.

The Chrysler Pacifica, a highly regarded minivan praised for its family-friendly features and innovative design, also uses a CR2032 battery in its key fob. The Pacifica's key fob offers functionalities like remote door locking and unlocking, remote start, and sliding door control. Maintaining the battery in the key fob is crucial for ensuring these features work seamlessly, enhancing the convenience and ease of use for families on the go.

Another popular model, the Chrysler Voyager, shares many similarities with the Pacifica and is also equipped with a CR2032 battery for its key fob. The Voyager is designed with affordability and practicality in mind, making it a favorite among budget-conscious families. The key fob's reliable battery ensures that users can enjoy features such as remote start and keyless entry without interruption.

For the more adventurous drivers, the Chrysler Aspen, a full-size SUV known for its versatility and rugged capability, typically uses a CR2025 battery for its key fob. Although the CR2025 has a slightly lower capacity than the CR2032, it is still sufficient to power the key fob's essential functions, including remote start and door lock/unlock. The CR2025's compact size fits well within the key fob's design, ensuring a reliable and user-friendly experience.

Understanding the specific key fob batteries used in these popular Chrysler models can help owners keep their vehicles running smoothly. Regularly checking and replacing the batteries as needed ensures that key fob functionalities remain reliable, supporting the convenience and security that modern Chrysler vehicles offer.

chrysler key fob battery 2

How to Start a Chrysler With a Dead Key Fob Battery

Encountering a dead key fob battery can be a frustrating experience, especially when you need to start your Chrysler vehicle. Fortunately, Chrysler has designed its vehicles to handle such situations, ensuring you can still access and start your car without significant hassle. Knowing the steps to start your Chrysler with a dead key fob battery can save you from potential inconvenience.

The first step is to manually unlock your car door. Most Chrysler key fobs contain a hidden mechanical key. To access this key, locate the small button or latch on the key fob. Pressing this button will release the physical key, which can then be used to manually unlock the driver’s side door. This allows you to enter your vehicle even if the key fob battery is completely dead.

Once inside the car, starting the engine with a dead key fob battery involves locating the key fob's designated slot or area. Chrysler vehicles are typically equipped with a sensor that can detect the key fob even when the battery is depleted.

Commonly, this sensor is located in the center console, near the steering column, or in the glove compartment. Consult your vehicle’s owner manual to find the exact location. Place the key fob in the specified area, press the brake pedal, and then press the start/stop button as you normally would to start the engine.

For Chrysler models with a traditional key ignition, the process is even more straightforward. Use the mechanical key from the key fob to turn the ignition and start the engine. This method ensures that you can start your vehicle regardless of the key fob’s battery status, providing a reliable backup in case of battery failure.

If these methods do not work, there could be other underlying issues beyond a dead key fob battery. In such cases, it might be necessary to replace the key fob battery as soon as possible or consult a professional for further assistance. Carrying a spare battery in your vehicle or at home can be a proactive measure to avoid future inconveniences. By understanding these steps and being prepared, you can ensure that a dead key fob battery doesn’t disrupt your plans.