Ancel BST200 Car Battery Load Tester
Ancel BST200 Car Battery Load Tester is a digital battery analyzer designed for 12V automotive, marine, and industrial lead-acid batteries, including batteries with flooded/wet cells, Gel-cells, and AGM (flat, spiral wound) batteries.
Ancel BST200 Car Battery Load Tester should not be used for testing of lithium-ion batteries and for batteries having a maximum voltage of 18 volts or more.
Ancel BST200 Battery Tester Features and Specifications
Ancel BST200 is a lightweight and rather compact digital battery analyzer and tester tool, with physical dimensions of (L x W x H) ~2.91 x 0.83 x 4.72 inches (~7.4 x 2.1 x 12 cm).
The tool itself is powered directly by a detected battery and provides rather accurate data within 3 seconds of the test start.
Ancel BST200 can be used for lead-acid only batteries having a capacity in the 30 - 100 Ah range and CCA in the 100 - 1100 Amps range.
Input voltage is between 6 and 18 volts - if the battery has voltage below 6 volts, it will not be detected and the unit will not start. Also, if the voltage is 18 volts or more, the unit may be damaged by such high voltage.
Operating temperature is between -20 and +60°C, while the storage temperature is between -20 and +70°C.
Ancel BST200 provides data according to different standards, including: JIS, DIN, IEC, EN and SAE.
Also, it tests the battery thoroughly, and presents the data to the user, including: CCA value (Amps), CCA rating (Amps), voltage (V), internal resistance (Ω), state of health (%), and state of charge (%).
In order to more accurately test the battery, Ancel BST200 comes with two modes:
- battery out of the vehicle (battery may be INSIDE the vehicle, but it is NOT connected to the vehicles electric system!),
- battery inside of the vehicle.
Note: if the battery is still inside the vehicle and still connected to the car's electric system, be sure that the engine is turned off, that all lights are turned off, that the doors are closed and that the key is out of the ignition. Although Ancel BST200 is very easy and intuitive to use, when it arrives, be sure to read the Owner's Guide/Instructions, just in case ...
Ancel BST100 comes with polarity reverse connection protection, it does not emit light, heat, or spark, and it does not discharge the battery.
Also, it allows the user to choose from 10 different interface languages: English, Spanish, French, German, Dutch, Italian, Portuguese, Polish, Turkish, and Russian.
Ancel BST200 and Power Generators
Since 30-100 Ah and 100-1100 CCA batteries are used for cranking mid and large propane, gas and diesel power generators, Ancel BST200 battery tester allows the user to quickly check the battery condition if there are issues with starting of the internal combustion engine.
Also, batteries and battery packs that are used in various off-the-grid, automotive, marine, industrial, etc. applications, may be quickly checked and tested, not only when there is some sort of an issue, but also periodically, ensuring that the user is always informed about the battery condition.
If You are looking for a battery analyzer/tester and BST200 fits your needs, consider it - it is simple to use, it is rather accurate, and it is very popular battery tester that comes at an acceptable price.
For more reviews and recommendations, feel free to check Ancel BST200 Car Battery Load Tester Amazon link (link opens in the new window).